AKVAir Smart 240
- 240 l
- 600 x 600 mm + 90 mm
AKVAir Smart 500
- 500 l
- 750 x 750 mm + 90 mm
|
AKVAir Smart - Heat and style for indoor spaces
AKVAir Smart is an effective indoor accumulator tank that can be installed in low-rise properties.
It does not require a separate technical space and can be located, for example, in a home
utility room. Its dimensioning conforms to European standards.
| AKVAir Smart |
| Model |
Akvair Smart 240 |
Akvair Smart 500 |
| Measures: |
600 x 600 mm + 90 mm |
750 x 750 mm + 90 mm
|
| Height (adjustable): |
1 995 - 2 035 mm |
1 995 - 2 035 mm |
| Insulation: |
Seamless polyurethane 70 mm |
Seamless polyurethane 70 mm |
| Volume: |
240 l |
500 l |
| Maximum pressure: |
3 bar |
3 bar
|
| Standard couplings: |
2 x 1” Charging connections, Male BSP thread
2 x 1” Bleed and drain couplings, Female BSP thread
1 x 2” Female BSP thread |
| DHW coil: |
Finned CU 22 mm, length 15 m |
Finned CU 22 mm, length 15 m |
| Solar coil: |
Finned CU 18 mm, length 6 m |
Finned CU 18 mm, length 6 m |
| or |
| Condensing coil: |
Finned CU 22 mm, length 12 m |
Finned CU 22 mm, length 12 m |
|
Available equipment:
- DHW mixing valve
- Four way valve
- Immersion heater 4,5 kW
- Drainvalve
- Laddomat 21-60
- Laddomat 11-30
- Motorized Valve: Laddomat ThermOmatic K
- Hooks for decorative panel
- Edge strip of the door with following colors:
• Red (standard)
• White
• Graphite gray
|
Connections: |
| 1. |
From boiler |
| 2. |
To boiler |
| 3. |
Immersion heater (only top mount) |
4.
|
DHW mixing valve |
5.
|
Solar coil |
6.
|
From central heating
|
| 7. |
To central heating |
| 8. |
Bleed |
| At bottom: |
9.
|
Drain / to Boiler
|
|
|
|
Energy for the tank is brought from the sun, a boiler if required, or other heat source.
Connection of air/water heat pump.
Energy transfer to the accumulator tank through the hot gas coil. |
|