akvaterm
AKVA 1500 EKAKVA 1500 EK

AKVA - Standard Accumulator Tank

Capacity 300-10 000 litres. The insulation is 100 mm seamless polyurethane
faced with steel sheet. Detachable side panels are also an option. An uninsulated accumulator tank coated with corrosion protection paint can also be delivered. The upper hatch has a standard hot water coil. A domestic hot water pre-heating coil, a solar heating coil and other coils can be placed in the lower hatch. There are 2” couplings for the electrical resistors located at center and bottom of the tank. Built-in guide pipes ensure the proper layering of heat. Standard domestic hot water coil size LK35. Standard pressure class 1.5 bar. Other available pressure classes 3, 4 and 6 bar.

MODEL DIAMETER
mm
HEIGHT
mm
WEIGHT
kg
CONNECTIONS
SIZE (ID 2/5)
RESISTOR
COUPLINGS
AKVA 300 EK 710 2050 130 1 1/4" 2
AKVA 500 EK 800 2050 155 1 1/4" 2
AKVA 750 EK 950 2050 200 1 1/4" 2
AKVA 1000 EK 1050 2100 230 1 1/4" 2
AKVA 1500 EK 1250 2150 280 1 1/4" 3
AKVA 2000 EK 1400 2200 330 1 1/4" 4
AKVA 2500 EK 1500 2250 360 1 1/4" 4
AKVA 3000 EK 1600 2300 400 1 1/4" 4
AKVA 4000 EK 1800 2450 480 1 1/4" 6
AKVA 5000 EK 2000 2500 600 2" 6
AKVA 6000 EK 2150 2500 750 2" 6
AKVA 7500 EK 2150 3000 900 2" 6
AKVA 10000 EK 2150 3800 1100 2" 6
EK = isolated and with one coil              Diameter 200 mm smaller without insulation
E = isolated

Rakennekuva 1. Hatch (2 pcs) Ø 200 mm
2. Heating Circuit Coupling + Guide Pipe 1 1/4” tai 2”
See table above.
3. Drain coupling 1"
4. Thermometer/Thermostat Coupling (4 pcs) 3/4"
5. Tank Coupling + Guide Pipe 1 1/4” OR 2”
See table above.
6. Electrical Resistor Coupling (2-6 pcs) 2"
7. Domestic Hot Water Coil
Couplings
LK 35
3/4"
8. Pressure Relief / Air Bleeder Coupling 1"
9. Polyurethane Insulation 100 mm
10. Coating, Coated Galvanised Steel Sheet 0,5 mm
11. Tank: standard structural pressure
Tank: maximum temperature
1,5 bar
+110° C

Download the manual >